Headlights illuminating interiors too

Discussion in 'Car Models | Physics' started by Kompressor_Inside, May 14, 2023.

  1. Kompressor_Inside

    Kompressor_Inside New Member

    Joined:
    May 14, 2023
    Messages:
    4
    Likes Received:
    0
    I'm having issues with headlights that illuminates part of the interior wood panel, I tried editing both the lights.ini and the ext_config.ini (tried [LIGHT_HEADLIGHT_0], [EMISSIVE_HEADLIGHTS_0] and the selflight), but I wasn't able to get rid of this "ghost" cone. Any ideas? Immagine 2023-05-14 232550.png Immagine 2023-05-14 232612.png
     
  2. fughettaboutit

    fughettaboutit aka leBluem

    Joined:
    Jul 21, 2014
    Messages:
    1,113
    Likes Received:
    378
  3. Kompressor_Inside

    Kompressor_Inside New Member

    Joined:
    May 14, 2023
    Messages:
    4
    Likes Received:
    0
    Thank you so much for the answer, I found out that the light is linked to this:

    [LIGHT_HEADLIGHT_0]
    AFFECTS_TRACK=1
    BOUND_EMISSIVE_MAX=500
    BOUND_EXP=1
    COLOR=200,180,120,0.1
    DIFFUSE_CONCENTRATION=0.88
    DIRECTION=0, 1.0, 10
    EXTERIOR_ONLY=0
    FADE_AT=450
    FADE_SMOOTH=50
    INTERIOR_ONLY=0
    LOWBEAM_RANGE_MAX=150
    LOWBEAM_RANGE_MULT=5.0
    LOWBEAM_RANGE_ONCOMING_MULT=0.8
    MIRROR=0.53
    MIRROR_DIRECTION=0
    POPUP_ENABLED=0
    POSITION=0, 0.94, 1.7
    RANGE=310
    RANGE_GRADIENT_OFFSET=0
    SECOND_SPOT=70
    SECOND_SPOT_INTENSITY=0.27
    SECOND_SPOT_RANGE=10
    SECOND_SPOT_SHARPNESS=0.28
    SECOND_SPOT_SKIP=0.3
    SINGLE_FREQUENCY=0
    SPECULAR_MULT=1
    SPOT=58
    SPOT_EDGE=0.02088, 0.01992, 0.018
    SPOT_EDGE_SHARPNESS=50
    SPOT_SHARPNESS=0
    SPOT_UP=0.0499376, 10.998752, 0

    which is used for the front headlights, so if I delete this, the "interior light" would go away along the headlights, I'll take right now a look for the guessed configs, thanks again. I can't post the whole ext_config since I'm editing it right now and there are some other mistakes to fix
     
  4. fughettaboutit

    fughettaboutit aka leBluem

    Joined:
    Jul 21, 2014
    Messages:
    1,113
    Likes Received:
    378
    this might be wrong
    POSITION=0, 0.94, 1.7 ; try 1.9 or more

    ;;; for last y coordinate, second is z (height)
     
    Last edited: May 15, 2023
  5. Kompressor_Inside

    Kompressor_Inside New Member

    Joined:
    May 14, 2023
    Messages:
    4
    Likes Received:
    0
    I tried moving the light away in all of the three axes, but no luck... at least I found out that my lights were not aligned
     
  6. fughettaboutit

    fughettaboutit aka leBluem

    Joined:
    Jul 21, 2014
    Messages:
    1,113
    Likes Received:
    378
    you have some dashboard light assigned when lights are on? it might be that.
    What did the guessed thingy reveal?
     
  7. Kompressor_Inside

    Kompressor_Inside New Member

    Joined:
    May 14, 2023
    Messages:
    4
    Likes Received:
    0
    I forgot to try the guessed config, and yes, I have other lights in the dashboard, like the labels' one or the cluster one, but even after deleting them, that bright area would stay. Thank you again for your time.
     
: headlights, CSP
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice